open camera redmi note 5
Battery Overheating and Phone Switching OFF Suddenly and Automatically. If your Mi Redmi Note Phone is overheating and Battery drains fast OR the device gets automatically power off once it reach to below 30% to 20% battery charge even when the battery power saving mode is turn off then most probably there is SHORTING Problem in the PCB of the
This guide will help you to Enable Developer Option and USB Debugging On Xiaomi Redmi Note 5 (Redmi 5 Plus). As you know Android is an Open Source mobile OS and it is the most used mobile OS available right now. The best thing about Android Os is the freedom it gives its users. It is the freedom to modify and redistribute without any chains to hold. And, as an end-user (which you are), the gates of freedom open with the developer options. It’s the stepping stones of customization and freedom that has been labelled so far. You wouldn’t see anything like the flexibility these offer in any other OS. In Android, the Developer Option setting is a very important setting. By default the option is hidden, but you can easily Enable Developer Options In Xiaomi Redmi Note 5 (Redmi 5 Plus) by following the given simple steps. The Developer settings contain many useful settings like USB debugging which are very important for rooting or modding android device. Xiaomi Redmi 5 Plus is a mid-range Android device which is also known as Xiaomi Redmi Note 5 in the Global market. The device comes equipped with a touchscreen display with a resolution of 1080 pixels by 2160 pixels. The Redmi 5 Plus is powered by 2GHz Octa-Core CPU which is coupled with 4GB of RAM. The phone packs 32GB of internal storage which can be expanded up to 128 via microSD. Xiaomi Redmi 5 Plus sports a 12-megapixel primary camera on the back and a 5-megapixel front camera. The Redmi 5 Plus runs Android Nougat with MIUI at the top and houses a 4000mAh non-removable Steps To Enable Developer Option and USB Debugging On Xiaomi Redmi Note 5 (Redmi 5 Plus) Note: The process is the same for all most all the android devices. The images shared below are from our OnePlus 6t post, but this will work on all stock android devices. Option First, open Settings on your Xiaomi Redmi Note 5 (Redmi 5 Plus) Now scroll down to About Phone and tap on it Scroll down to MIUI Version and tap 5-7 times to enable developer option USB debugging on Xiaomi Redmi Note 5 (Redmi 5 Plus) Once you enabled the Developer Options. Returned back to Settings > Additional Settings >Developer Options > USB Debugging. Just Enable that option. Done!! USB Debugging on Xiaomi Redmi Note 5 (Redmi 5 Plus) is now enabled. If you liked this guide, then share it. If you have any quarries regarding this guide, feel free to leave that in the comment section down below. An NIT Rourkela Graduate in CS, Blogger, Android Geek, and a Tennis Fanatic. I have been writing about Android OS for Last 8 years. We use cookies on our website to give you the most relevant experience by remembering your preferences and repeat visits. By clicking “Accept”, you consent to the use of ALL the cookies.
Let’s clear the cache and try again. Step 1: Press and hold the Camera application icon and open the application information menu. Step 2: Go to the Storage and Cache menu. Step 3: tap Clear cache and you are ready to use a camera app on the XIAOMI REDMI NOTE 9 PRO. 6. There are 3 methods to activate MIUI Camera2 API you can follow easily on Redmi Note 5 codename Whyred (Pro/Global/China/AI). The first and second methods require no root. The third method, however, is the ultimate trick that requires rooting your phone. Either with root or without root, enabling Camera2 API on your Xiaomi device requires an unlocked bootloader. Any method you try will just fail if your phone bootloader is not unlocked officially. Unlocking bootloader is utterly easy. We have wrapped up the complete steps to obtain bootloader unlock permission here. Before we proceed, make sure you have created a backup of all your important files and data. Despite this method is perfectly safe, we cannot guarantee anything. We have no responsibilities of any damage that might happen to your device. Requirements You will need the following stuff: ADB and Fastboot Driver and Platform Tools. TWRP Recovery image (.img). Anti-rollback Protection (ARB) bypasser. DM Verity Disabler. The latest version of Magisk. Camera2 API Enabler (zip). Any compatible USB Data cable 1. No Root, No TWRP Flashing This method requires TWRP custom recovery but we are not going to install it. We need it only for booting into custom recovery. Again, you will have no TWRP installed at the end of this process. Disable Windows Driver Signature Enforcement on your computer. Install ADB Fastboot Driver or Android Platform Tools on your computer. You may install it on drive C:\adb\. Enable USB Debugging on your phone. Go to Settings >> Additional Settings >> Developer Options >> USB Debugging. Download and copy the TWRP image file to your ADB folder. Rename the file to Download ARB Bypasser and extract the zip file. You will get a file. Copy that file to the adb folder as well. Hold down the “Shift” button your keyboard and right-click anywhere inside the ADB folder. Choose “Open Command Prompt Window here” or “Open Windows PowerShell Window here”. Now connect your phone to your computer using the prepared USB cable. Make sure the connection type is “MTP” and is NOT “Charging”. In the Command Prompt window, type “adb devices” (without quotes) and hit Enter key. This asks the computer to recognize your device and to establish ADB connection. Next, type “adb reboot bootloader“. This will reboot your phone into fastboot mode. If your device has ARB index 4 or greater, type “fastboot flash antirbpass and hit Enter. The command order your computer to flash file to your device through the Fastboot interface. Otherwise, skip this step and go to the next step below. Recommended reading: How to check for ARB index. Now issue the following command: fastboot boot This tells your computer to boot your phone using TWRP image. Your phone should now display the TWRP main menu but you may need to allow system modification at first. Next, type “adb pull /system/ and hit Enter. The command asks the system to download “ file from our device to your computer. Open the “ file using a text editor of your choice (Notepad, Notepad++, or Sublime). Add the following text inside that file “ – you can copy-paste it, without quotes. Save the file (Control+S) and close the text editor. Finally, issue the following command lines: Type and hit Enter on your keyboard. adb push /system/ adb shell cd system chmod 644 adb reboot Credit: Sahil4518 on XDA. Alternative method: Follow Steps 1 until Steps 12 above. Then issue the following command: adb devices adb shell setprop 1 exit adb reboot Your phone will reboot into normal mode but this time the Camera2 API has been enabled. Credit: RSubha on XDA. As for us, this alternative method that really works. 2. No Root, with TWRP Disable Windows Driver Signature Enforcement on your computer. Install ADB Fastboot Driver or Android Platform Tools on your computer. You may install it on drive C:\adb\. Enable USB Debugging on your phone. Go to Settings >> Additional Settings >> Developer Options >> USB Debugging. Download and copy the TWRP image file to your ADB folder. Rename the file to Download ARB Bypasser and extract the zip file. You will get a file. Copy that file to the adb folder as well. Download the Camera2 API Enabler (zip) and DM-Verity No Encrypt (zip) to your phone directly. Do not need to extract the zip file. Hold down the “Shift” button your keyboard and right-click anywhere inside the ADB folder. Choose “Open Command Prompt Window here” or “Open Windows PowerShell Window here”. Now connect your phone to your computer using the prepared USB cable. Make sure the connection type is “MTP” and is NOT “Charging”. In the Command Prompt window, type “adb devices” (without quotes) and hit Enter key. This asks the computer to recognize your device and to establish ADB connection. Next, type “adb reboot bootloader“. This will reboot your phone into fastboot mode. If your device has ARB index 4 or greater, type “fastboot flash antirbpass and hit Enter. The command order your computer to flash file to your device through the Fastboot interface. Otherwise, skip this step and go to the next step below. Recommended reading: How to check for ARB index. Now flash TWRP using this command: fastboot flash recovery This instructs the computer to flash TWRP image file to the phone through the fastboot interface. The process should finish within seconds. Type “fastboot reboot recovery” and hit Enter. This will boot your device into TWRP. Your phone will now reboot into TWRP recovery mode. Slide to allow system modification. By doing this, it will trigger the MIUI DM-Verity security check. Choose “Install” from the main menu. Locate and choose the Camera2 API .zip file. Tap on it to choose it. Swipe to confirm flashing. Wait few seconds until the process complete. Go back to the main and tap “Install” again. Locate and choose the DM-Verity Disabler .zip file. Tap on it to choose it. Swipe to confirm flashing. Wait few seconds until the process complete. Once done, tap “Reboot” 3. With Root, with TWRP and Magisk Follow our comprehensive guide on how to root Redmi Note 5 Whyred. Open up Magisk Manager app. Tap the menu icon at the top left corner of the screen. Choose “Downloads”. Tap the Search icon. Search for “Camera2 API“. Tap the Download icon to start downloading. Tap “Install” then reboot. What’s next? You can confirm whether your attempt is a success or not. Simply download the “Manual Camera Compatibility Test” app or “Camera2 Probe” app from the Play Store. You should get something like this: Credits: jhangyu on XDA. UPDATE: Users running MIUI 10 based on Android Pie should follow our latest guide: How to enable Camera2 API on Redmi Note 5 MIUI 10 Android Pie. Do not hesitate to post a comment below. Xiaomi Redmi Note 7 has a 13MP front-facing camera which combines an OmniVision OV13855 sensor with an f/2.0 lens. The same sensor is used by the front camera of Xiaomi Redmi Note 5 with Snapdragon 636. The selfie camera of the Redmi Note 7 shoots photos with a resolution of 4224 x 3136 pixels and 1080p videos at 30 fps. Hello Xiaomian! What's up? I hope you are well by the grace of Allah. Alhamdulillah, I'm also fine. We know that many of Xiaomi users are using Gcam on their device. Because it offers more benefits than our phone's stock camera. Example: Better low light shots, better portraits, 360 pictures and much more. But the main problem is, after updating Android (Pie) on Redmi Note 5 Ai/Pro Gcam isn't working. So, how we can enable it? It's very simple. Just follow the old method only change BuildProp command line. ❒ Warning: This tutorial is only for Whyred. Use the latest custom recovery and must back up your all data. Do anything at your own risk. ❒ Requirements:● Unlock Bootloader● Custom Recovery (For Pie)● Magisk● Mi USB Driver● ADB Driver So, don't any more time let's start... ● Install all necessary drivers.✓ Mi USB Driver: ( MB, Downloads: 617) ✓ ADB Driver: Universal Adb ( MB, Downloads: 449) ● Unlock your device Bootloader. Here. ● Download the Fastboot tool.✓ FastbootTool: ( KB, Downloads: 542) ● Now download the latest OrangeFox recovery for whyred: Download Now.(Also you can use another custom recovery. But use the latest version) ● Now copy Magisk, OrangeFox recovery on your device storage. ● Extract FastbootTool and ● Open OrangeFox extracted folder and cut "recovery" and then open FastbootTool folder and paste "recovery". ● Select all files and type "cmd" on the address bar. ● Now boot your device into the fastboot mode. For this power of your device and press Power and Volume Down button (-) at the same time. If your device makes any problem on this then first Power Off your device then hold press Power Button then connect the USB cable, I hope this trick will be work. ● Connect your device with your computer and type "fastboot devices" if your device showing a code then everything is ok. ● Now type "fastboot boot and wait some time. After some moments you can see your device booted into the recovery mode and it showing OrangeFox. ● Swipe to allow modification and go to install. ● Now select " where you put and swipe to install. If your device asking for an option then select "recovery". Install Magisk. After successfully installing all the file reboot your device. ● Now open Magisk Manager and check everything. If you don't find Magisk Manager app. Then download it and install. Download Now. ● Open it and "Grant" root permission. ● Now click on search icon and type " ● After searching you can see a result. Now click on the result and change it values 0 to 1 then save. ● Now reboot your device. After rebooting download Manual Camera Compatibility app and open it. Click on start. If you can see everything is green then congratulations. You successfully enabled camera2 api without any problem. Download Now. ● Download Gcam from here, install and enjoy.❒ Picture Sample: Even though the 200-megapixel sensor is the Redmi Note 12 Pro+'s main camera, by default, it takes images in a lower 12.5-megapixel resolution. Here's how to take 200 MP photos on Redmi Note 12 Pro+. Can’t Connect to Camera ErrorSolved this by doing the following on redmi note 7 pro:1. Go to Settings - About phone-all specs 2. Tap 5-6 times on “Kernel version”. This will enter to Engineering Mode (CIT) 3. From “QC test” menu, to option for “master back Camera“ 5. Camera app will start with the camera. You should have image from sensor. 6. Tap back to exit the camera app, and select “Fail”. This will reset the sensor and sensor repeat 4 to 6 step for all other camera option8.. Exit CIT mode and test your camera. If was a problem with the sensor (or lens), it should be solved more solution :------------------------------------------------------------------------------------------------------------------------this is due to camera2 api is locked. to unlock follow there steps 1. Open the device settings Tap on About phone Scroll down and tap on MIUI version slot five times. This will unlock the developer options in your MIUI device which can be located under “Additional Settings.” 2. Developer Option -Enable USB Debugging Enable OEM Unlocking from Developer option -Mi Unlock status -Add account and device. If you see error like "connect to the network & try again" then Logout the Mi Account from device then try step 3. now its done cheers. The app may have difficulty focusing on the main object if there is any serious damage or cracks in the XIAOMI REDMI NOTE 10 5G’s camera module. 5. Use the XIAOMI REDMI NOTE 10 5G’s night mode. When faced with difficult lighting conditions, the XIAOMI REDMI NOTE 10 5G’s main camera may have difficulty keeping the subject in focus.Try to Hard reset , first backup your data(ALL APPS WILL BE DELETED) then power off your device then pressing Volume up + Power button simultaneously, after that select the wipe data option (Press Volume up or down to chose option & press power button to select), after wipe data, select the reboot option, your device will restart, remember, some time it takes some time to wipe data (Depends on how much data in your device) & reboot device, so don't get panicked. you can search in youtube for more information, Hope that you problem gets solved.